06033 THROTTLE GEAR 42T HSP ATOMIC Redcat HIMOTO ETC

06033 THROTTLE GEAR 42T HSP ATOMIC TYRANNO HIMOTO ETC

08010 1/10 MONSTER TRUCK WHEEL, TIRE AND BLUE RIM COMPLETE ( 2 PC) HSP, Redcat

Monster Truck Wheel Tire And Blue chrome Rim Complete (2 Pieces) for HSP, Redcat, Exceed and other 1/10 scale trucks with 12mm hex mounts   Width: 60mm Height: 115mm

106004 or 166004 or 06038 ALLOY SHOCK ABSORBERS 1/10 HSP ETC 2P 06002

106004 or 166004 or  06038 ALLOY SHOCK ABSORBERS 1/10  HSP ETC 2P

60065 Differential Gear set 1/8 scale with Metal Spur Gear HSP Redcat

60065 center Differential gear set 1/8 scale with Metal Spur Gear for Nokier, Planet and similar HSP and Redcat products

88326 F/R Lower Suspension Arm Hinge Pin 3.5*66mm

88326 Front/Rear  Lower Suspension Arm Hinge Pin 3.5*66mm

02024 DIFF.GEAR COMPLETE HSP ATOMIC TYRANNO HIMOTO ETC

02024 DIFF.GEAR COMPLETE HSP ATOMIC TYRANNO HIMOTO ETC

02020 02185 1/10 SCALE WHEEL, TIRE AND GOLD RIM COMPLETE X 2

02020 02185 1/10 SCALE WHEEL, TIRE AND GOLD RIM COMPLETE X 2 26 x 52 mm 12 mm hex

06026 1/10 scale HSP 2 Rear Wheel & Tire Blue Rim

Rear wheels for 1/10 scale buggy Tires are 85mm diameter,40mm wide, rims 63mm internal diameter and internal hex mount is 12mm

89108 Blue Wheel Hub Extenders 4PC HSP 1/8 Scale With Wheel Nut Cover

These hub extenders will basically extend the location of the hub out by the length of the extender itself. These hub extenders can be used on Tornado, Bazooka, and other HSP 1/8 models. 1) By widening the truck (1" per side), the center of gravity of...

TS1A-3 PULL START SUIT SH 21 and SH18 ENGINE

Pull start for SH21 and SH18 engines Screw Holes - 27mm apart

62007 Second Way Gear (42T&47T) 62907

60064 P Center Rear Dogbone (84mm) 2P

60064 P Center Rear Dogbone (84mm) 2 Pieces 84mm end to end ,  79mm peg to peg

62017 Body Post Mount (Front)

62017 Body Post Mount (Front)

62004 Rear Bumper 1/8 Scale Truck

62004 Rear Bumper 1/8 Scale

62002 Bumper Stay Post

62002 Bumper Stay Post for 1/8 scale

60010P Diff. Cups 2 Pieces

60010P Differential  Cups 2 Pieces for 1/8 Scale HSP With Pins and rubber inserts

862002 Body Post Mount(Front) (AL.)

862002 Body Post Mount(Front) (ALuminum)

60071 Front Upper Suspension Arm Hinge Pin 3*48 2P

60071 Front Upper Suspension Arm Hinge Pin 3.5mm*47mm 2P

60091 Countersunk Self-tapping Screw 3*16 8P

60091 Countersunk Self-tapping Screw 3mm*16mm 8P

860007 Front Top Plate(Al.) Blue 760007

860007 Front Top Plate (Aluminum upgrade)

60005 Front Lower Suspension Arm 2P 1/8 Scale

60003 Shock Absorber 2P 1/8 scale Blue

Alloy Top Shock Absorber for 1/8 scale -- HSP Nokier, Planet models   11.5cm long

02372 SERVO ARM CAR/BUGGY/TRUCK

02372 SERVO ARM  CAR/BUGGY/TRUCK 2 pieces 

06010 1/10 Scale Tire & Rim Yellow for Front HSP ATOMIC

Front tire for 1/10 scale buggy Dimensions of tire are about 8.7cm x 3 cm 12mm hex mount As with most spare tires, the tires are not pre-glued   -- you can use rim glue from a local RC bobby shop or some high quality crazy glue  

86090 BODY CLIPS / PINS HSP 1/16 SCALE

86090 BODY CLIPS HSP 1/16 SCALE

86010 FRONT UPPER SUS/ARM HSP 1/16 SCALE

86010 FRONT UPPER SUSPENSION ARM HSP 1/16 SCALE

86034 FRONT UPPER SUS/PIN HOLDER HSP 1/16 SCALE

86034 FRONT UPPER SUSPENSION PIN HOLDER HSP 1/16 SCALE

86033 DIFF. GEAR COMPLETE HSP 1/16 SCALE

86033 Differential Gear Complete for  HSP 1/16 Scale

81029 FUEL TANK HSP 1/8 SCALE BAZOOKA TORNADO ETC

81029 FUEL TANK for HSP 1/8 SCALE BAZOOKA TORNADO ETC

02036 Front Lower Arm Pin A HSP ATOMIC TYRANNO HIMOTO ETC

02036 Front Lower Arm Pin A HSP ATOMIC TYRANNO HIMOTO ETC

06001 CHASSIS HSP ATOMIC TYRANNO HIMOTO ETC

06001 Chassis Blue for most HSP, REDCAT, ATOMIC TYRANNO HIMOTO ETC 1/10 Scale Nitro Gas Buggies and Trucks

02059 Exhaust Pipe Holder with screw & nut HSP ATOMIC TYRANNO HIMOTO

02059 Exhaust Pipe Holder with screw & nut   for 1/10 scale

08010 1/10 MONSTER TRUCK WHEEL, TIRE AND RIM COMPLETE ( 2 PC) HSP, Redcat

Monster Truck Wheel Tire And Solver Rim Complete (2 Pieces) for HSP, Redcat, Exceeb and other 1/10 scale trucks with 12mm hex mounts   Width: 60mm Height: 115mm

02026 EXHAUST PIPE HSP ATOMIC TYRANNO HIMOTO ETC

02026 EXHAUST PIPE HSP ATOMIC TYRANNO HIMOTO ETC

08034 BRAKE PADS HSP ATOMIC TYRANNO HIMOTO ETC

08034 BRAKE PADS for HSP ATOMIC TYRANNO HIMOTO ETC

06018 Front/Lower Arm B Pin HSP ATOMIC Redcat HIMOTO ETC

27mm long